Elektrilise torukujulise kütteelemendi lekke tuvastamiseks loksutage mõõdikut
Today,Suwaie company & #39;s tubular heating element manufacturers will tell you how to correctly use the shake meter to detect the leakage of the electric tubular heating element, so as to solve the problem in a targeted manner:
Erinevate elektriseadmete testimiseks kasutatavad Megohm - taseme takistusmõõturid hõlmavad digitaalseid ja osuti-multimeetreid. Tutvustame siin teise takistusmõõturi, nimelt raputusmõõturi kasutamist elektrilise torukujulise kütteelemendi tuvastamiseks. Kui raputajat kasutatakse elektrilise torukujulise kütteelemendi tuvastamiseks, oleme harjunud ühendama raputi küttetoru klemmi ja küttetoru kestaga, et tulemus oleks tuvastatav.
Before using the shaker, the shaker should be kept in a horizontal position, and the wiring must be correct (the shaker has three terminals L, E, and G. The L end is connected to the bare conductor of the loop, when measuring the resistance of the loop to ground; the E end is connected to ground When the insulation resistance of the circuit is measured by measuring the insulation resistance of the circuit with the wire or metal shell, the first end and the end of the circuit are connected to L and E. To prevent the appearance of the cable from affecting the measurement accuracy, the shielding layer of the cable should be measured. (Connect to terminal G) Hold the watch body with your left hand and shake the watch handle with your right hand. The speed should be about 120r / min. The pointer should point to infinity (∞) as normal, otherwise it indicates that the electric heating tube is malfunctioning.
Seetõttu on oluline meeles pidada, et lekke tuvastamise ajal ei tohiks elektriline toruküttekeha juhuslikult ühendada. Katsetamisel ärge puudutage lõpuks loksuti sidumisposti ja mõõdetud vooluringi. Elektrilöögi vältimiseks; pärast arvesti raputamist, et vältida kahjustusi, oleks klemmide vahel lühike - vooluring, aeg ei tohiks olla liiga pikk.
Elektrilised torukujulised kütteelemendid jagunevad üldjuhul tsentraalseteks torukütteliseks ja tööstuslikuks toruküttekehaks ning tööstuslikud toruküttelised pole sageli - standardtooted ja ka struktuur on erinev. Konstruktsiooni kujundamine on sageli mugav kütteseadmete paigaldamiseks või esteetika tagamiseks, nii et disain Samuti on palju asju, millele peaksime tähelepanu pöörama, kui tegemist on elektriküttetorude struktuuriga.
1. The design of the tubular heating element should take into account the effects of thermal expansion and contraction, ablation, oxidation, creep, etc., to avoid failure due to deformation during normal operation.
2. The design of the internal structure of the tubular heating element should ensure that the highest temperature of the material used for manufacturing the tubular heating element or the highest temperature that may be encountered in its processing will not be damaged, and it can still work reliably.
3. The design of the welding structure of the electric tubular heating element should meet the relevant standards. The welding seam of the piezoelectric heating tube, especially the part inside the container, should be as few as possible. The setting of the welding seam should be easy to check.
4. Survelaagriga torukujulise kütteelemendi kest ja selle lisaseadmed peavad vastama asjakohastele standarditele. Elektriline toruküttekeha (koos otsaga) tuleb tihendada.


